Product Name
PE PPGI (Polyester Prepainted Galvanized Steel Coil)
1. Product Overview
PE PPGI refers to prepainted galvanized steel coil with a polyester (PE) coating applied to a hot-dip galvanized or galvalume substrate. It is the most widely used type of color-coated steel due to its cost efficiency, excellent formability, and wide color range. PE PPGI is ideal for interior applications and medium-duty outdoor environments such as roofing, wall cladding, and appliance panels.
2. Base Metal and Coating System
Base Metal: Cold-rolled steel sheet (typical grades: DX51D / SGCC / equivalent), coated with zinc (e.g., Z30–Z275) for corrosion resistance.
Topcoat: Polyester (PE) - economical, good gloss retention, suitable for short- to medium-term outdoor exposure and long-term indoor use.
Primer / Backcoat: Epoxy or low-temperature polyester-based primer and backcoat to improve adhesion and corrosion resistance.
Typical Coating Structure: Pretreatment → primer (5–8 µm) → topcoat (15–25 µm) → backcoat (5–10 µm) - customizable per project.
Surface Treatment: Chemical cleaning, phosphating or chromate-free passivation to enhance paint adhesion and substrate durability.
3. Typical Specifications (Customizable)
| Item | Range / Description |
|---|---|
| Thickness | 0.12 – 1.2 mm (commonly 0.3 / 0.35 / 0.4 / 0.47 / 0.5 / 0.6 mm) |
| Width | 600 – 1250 mm (standard: 914 / 1000 / 1219 mm; slit sizes available) |
| Coil ID | 508 mm or 610 mm |
| Coil Weight | 1.5 – 8 MT (depending on size) |
| Topcoat Thickness | 15–25 µm |
| Backcoat Thickness | 5–10 µm |
| Color Options | Standard RAL colors and custom shades (white, red, blue, gray, green, woodgrain, etc.) |
4. Key Features & Advantages
Economical: PE coating offers excellent value for large-scale applications with moderate durability needs.
Good Formability: Suitable for cold bending, roll forming, corrugating, punching, and folding without paint cracking under recommended radii.
Attractive Finish: Available in various colors, gloss levels, and simple textures for consistent and uniform appearance.
Moderate Weather Resistance: Resists UV and general atmospheric conditions; suitable for indoor or semi-outdoor environments.
Excellent Adhesion & Impact Resistance: Meets cross-cut adhesion, impact, and T-bend flexibility standards.
Eco-friendly Options: Lead-free, low-VOC, and chromate-free passivation systems available for green building compliance.
5. Quality Control & Testing
Coating Thickness Measurement (µm)
Adhesion (Cross-cut)
Flexibility / T-bend
Impact Resistance (Gardner test)
Salt Spray Test (NSS) - duration per customer requirement
Color & Gloss Deviation (ΔE, gloss units)
Surface Inspection: pinholes, blisters, particles, scratches
Zinc Coating Verification: Z60 / Z120 / Z180 / Z275 as specified
Documentation: MTC (Mill Test Certificate), inspection reports, batch traceability.
6. Typical Applications
Construction: Roofing sheets, wall cladding, eaves, ceilings, door frames, rainwater systems.
Home Appliances: Outer panels for washing machines, refrigerators, and household equipment.
Light Industry & Furniture: Cabinets, shelves, lockers, and decorative furniture.
Agricultural & Storage Facilities: Sheds, fencing, warehouses.
Advertising & Interior Decoration: Signboards, display panels, partitions (for indoor or semi-outdoor use).
For coastal or highly corrosive environments, higher durability coatings such as PVDF, HDP, or thicker zinc layers (e.g., Z275) are recommended.
7. Storage & Handling Guidelines
Store in a dry, ventilated area, away from direct moisture or wet floors.
Prevent condensation: allow coils to reach ambient temperature before unpacking.
Handle carefully: use soft lifting straps, coil tongs, and edge protectors to avoid paint damage.
Stacking: use wooden supports or pallets; prevent excessive compression or edge impact.
8. Packaging & Labeling
Inner Packaging: Waterproof kraft paper or VCI anti-rust film.
Outer Packaging: Steel strapping, corner protection, and wooden crate or pallet for export.
Labeling: Each coil marked with thickness × width, color code, coating type, zinc grade (e.g., Z120), net weight, coil number, and production date.
9. Ordering Information
Please specify the following when ordering:
Thickness and width of the base steel.
Zinc coating level (Z60 / Z120 / Z180 / Z275).
Coating system: PE (standard or high-durability), primer/backcoat thickness, total paint thickness.
Color and gloss level (RAL number or sample).
Coil weight / ID (508 or 610 mm) and packaging requirements.
Inspection & certification needs (MTC, third-party, salt spray test).
Intended application and forming process (deep drawing, roll forming, bending radius).
Quantity, destination, and delivery schedule.
10. Comparison with Other Coating Types
| Type | Features | Applications |
|---|---|---|
| PE | Economical, flexible, moderate weatherability | General building and interior use |
| HDP | Improved UV and corrosion resistance | Outdoor walls, roofs |
| PVDF | Superior color retention, long service life | Coastal, industrial, premium architecture |
| Plastisol | Very thick, durable, high wear resistance | Roofing and cladding requiring extra protection |
11. Value-Added Services
Slitting, shearing, and leveling.
Roll forming (corrugated, trapezoidal, purlin shapes).
Pre-punching and custom cut-to-length.
Protective film application and export-grade packaging.
Third-party inspection and quality certification.
12. Why Choose PE PPGI
Most cost-effective color-coated steel for general-purpose use.
Excellent processability and broad color availability.
Suitable for both indoor and moderate outdoor environments.
Customizable coating thickness and zinc mass for balanced performance and cost.
Eco-friendly coating systems available for sustainable projects.
If you like, I can generate one of the following for you right away:
A technical datasheet (PDF/table) showing weight, coverage, and coil yield for your selected thickness and width.
A usage recommendation based on your application (roofing, wall, interior, appliance, etc.).
A website-ready product page in English and Chinese for marketing or quotation use.
Just tell me which option you need and provide your preferred thickness, width, and usage scenario.
Hot Tags: pe ppgi, China pe ppgi manufacturers, suppliers, factory, galvanized steel for vehicle pre painted, galvanized steel for mass production pre-painted, galvanized steel for e commerce pre painted, hot rolled pre painted galvanized steel, pre painted galvanized steel for fire resistance, galvanized steel for multiple coats pre painted



