Pre-Painted Gavalnized Steel Coil

Pre-Painted Gavalnized Steel Coil

The base material of color-coated coils can be cold-rolled coils or hot-dip/electroplated steel.
Send Inquiry
Description
Technical Parameters
Products Description

 

The base material of color-coated coils can be cold-rolled coils or hot-dip/electroplated steel. Although the organic coating part of color-coated coils has a good anti-corrosion effect, there are still some small gaps in the organic coating, Air and moisture may enter and cause the substrate to rust, so the color-coated coil made of an uncoated substrate has a short service life, and it is easy to spread after scratching and cause the coating to peel off. The base material of color-coated coils is mainly galvanized steel or galvanized alloy steel.

 

Production process

 

The production process of pre-painted gavalnized steel coil is divided into pretreatment of the substrate, chemical conversion coating (non-organic metal coating), and organic non-metallic coating, and some production lines also have a post-coating process.

1. Substrate pretreatment

If the galvanized steel sheet used as the base material is not directly put into a color coating process after production, rust (white rust), dust, and other pollution may occur during transportation. If these cannot be removed, it will affect the quality of the color coating. The quality and all physical and chemical properties of the finished color-coated coil are closely related to the pre-treatment. In addition, after galvanizing, oil is applied for rust prevention, and these oils should also be removed before color coating. The pretreatment method used now is the alkaline solution degreasing method.

2. Chemical conversion coating

There are two functions, one is to further improve the anti-rust ability, and the other is to improve the adhesion between the base material and the coating, and improve the coating performance of the substrate.

There are generally three steps: one is phosphating, first a large number of crystals are formed on the metal surface, and then a phosphate film is formed on the metal surface with a phosphate solution; The salt reacts chemically with the pores to form a protective film. The third is pure water washing, using desalted or deionized water to wash away the passivation liquid

product-750-750
product-750-750

Hot Tags: pre-painted gavalnized steel coil, China pre-painted gavalnized steel coil manufacturers, suppliers, factory, pre painted galvanized steel for industrial use, pre-painted galvanized steel for large batch production, galvanized steel for meeting en pre painted, pre painted galvanized steel for flats, galvanized steel for shutter making pre painted, galvanized steel for simple installation pre painted