Product Name: Thin Steel Plate
Introduction
Thin Steel Plates are lightweight, flat‑rolled steel products generally under 3 mm in thickness, produced via cold‑rolling or hot‑rolling followed by pickling and skin‑pass finishing. Their low gauge and high surface quality make them ideal for applications requiring minimal profile, tight bending radii, and smooth finishes. Thin Steel Plates offer a balance of formability, strength, and cost efficiency for both industrial and decorative uses.
Key Specifications
| Specification | Details |
|---|---|
| Production Method | Cold‑rolled (preferred) or Hot‑rolled |
| Thickness Range | 0.20 – 3.00 mm |
| Width Range | 600 – 1,500 mm |
| Coil or Sheet Length | Cut‑to‑length up to 6,000 mm |
| Yield Strength | 200 – 350 MPa |
| Tensile Strength | 300 – 450 MPa |
| Elongation (min) | ≥ 15 % |
| Surface Finish | Bright, matte, or skin‑pass texture |
| Flatness Tolerance | ≤ 0.5 mm/m |
Custom gauges, widths, and finishing options available on request.
Features & Benefits
Superior Formability: Thin gauge allows tight bends, deep draws, and intricate stamping without cracking.
High Surface Quality: Smooth, scale‑free finish suited for painting, plating, laminating, or decorative overlay.
Lightweight Construction: Reduces overall component weight, contributing to energy savings and easier handling.
Cost‑Effective: Lower material cost per area compared to thicker plate; efficient for mass‑production parts.
Good Weldability & Joinability: Compatible with resistance welding, brazing, and adhesive bonding for multi‑material assemblies.
Applications
Appliance Panels: Refrigerator liners, oven doors, and washer/dryer cabinets.
Automotive Components: Inner door panels, reinforcement brackets, and trim pieces.
Electronics Enclosures: Server racks, control panel housings, and instrument covers.
Architectural Elements: Ceiling tiles, wall cladding accents, and decorative facades.
General Fabrication: HVAC ducting, lighting fixtures, and signage backplates.
Packaging & Delivery
Packaging:
Sheets interleaved with protective film; stacked on treated wooden skids and banded.
Coils protected with inner cores and outer wrap; banded and palletized.
Lead Time: 10–20 days after order confirmation for standard gauges; expedited service available.
Why Choose Our Thin Steel Plates?
Precision Rolling & Finishing: Advanced cold‑rolling lines deliver uniform gauge and flatness.
Stringent QC: 100 % inspection for thickness accuracy, mechanical properties, and surface quality.
Tailored Solutions: Options for pre‑painting, galvanizing, or specialty coatings to match end‑use requirements.
Responsive Support: Technical guidance on forming limits, surface treatments, and application design within 12 hours.
Contact Us
For high‑quality Thin Steel Plates customized to your exact gauge and finish needs, please contact our sales team. We're committed to providing precision steel solutions and expert support for your next production run.
Hot Tags: thin steel plates, China thin steel plates manufacturers, suppliers, factory, flat bar steel greater than surface, flat bar steel less than surface, flat bar steel not equal surface
