Product Name
Large-Section Medium Channel Steel (Heavy C-Section)
Introduction
Large-Section Medium Channel Steel are heavier, deeper channel (C / U) profiles engineered to serve as primary or heavily loaded secondary structural members where standard light channels are insufficient but full plate girders are unnecessary. They combine the economy and connection-friendliness of channel sections with increased depth, flange and web thickness to handle greater bending moments, shear forces and local concentrations in bridges, industrial buildings, crane runways and heavy equipment support structures.
Typical Specifications
| Parameter | Typical Range / Notes |
|---|---|
| Section Type | Large medium-duty C-channel / U-channel (hot-rolled or fabricated) |
| Section Depth (h) | 200 – 600 mm (typical medium-large range) |
| Flange Width (b) | 75 – 250 mm |
| Web Thickness (tw) | 8 – 25 mm |
| Flange Thickness (tf) | 10 – 50 mm |
| Mass per Metre | ~30 – 200 kg/m (depends on exact dimensions) |
| Lengths | Standard 6 m / 12 m; spliced/built-up for longer spans |
| Materials / Grades | S355 / S420 (EN); A572 Gr.50, A36, A992 (ASTM); weathering steels (e.g., Corten) or higher-strength grades on request |
| Yield Strength | ≈ 355 – 420 MPa (grade dependent) |
| Typical Manufacture | Hot-rolled (where available) or welded/built-up from plate for non-standard sizes |
| Finishes | Mill, shot-blast + primer, hot-dip galvanize, epoxy/PU coatings, intumescent fireproofing |
Key Features & Advantages
Higher bending & shear capacity: Deeper web and thicker flanges yield greater section modulus and shear area vs standard channels.
Economical alternative to plate girders: For many medium spans, a large channel or back-to-back channel assembly offers cost and handling advantages.
Connection-friendly geometry: Flat flange surfaces simplify bolted splice, bracket and stiffener connections.
Flexible supply: Available as single hot-rolled channels for standard sizes or as fabricated welded channels/built-ups for bespoke depths and thicknesses.
Add-on options: Can be supplied with welded cover plates, stiffeners, drilled holes, coping and factory-fit splice plates for rapid site erection.
Corrosion & fire protection: Multiple coating systems and weathering steel options for demanding environments.
Typical Applications
Crane runway beams and gantry rails (medium-duty cranes).
Industrial building primary/secondary beams and long-span purlins.
Bridge approach spans, short-span girder solutions and culverts.
Machine bases, heavy equipment supports and mezzanine girders.
Retrofitting or strengthening of existing frames where added section modulus is required.
Back-to-back channel assemblies used as built-up box or plate girders.
Fabrication & Value-Added Services
Built-up assemblies: Back-to-back channel pairs with welds/bolts to form box-like sections.
End machining & copes: CNC coping, hole patterns, slotted bolt holes and prepared mating faces.
Reinforcements: Welded stiffeners, web openings with reinforcement cages, flange cover plates.
Pre-assembly: Match-drilling, tack-welded splice packs and delivery in erection kits.
Surface treatment: Shot-blasting, primer, multi-coat paint, hot-dip galvanizing, or intumescent coatings per spec.
Quality Assurance & Testing
Material certification: Full Mill Test Certificates (MTC) and chemical analysis.
Dimensional inspection: Depth, flange width/thickness, web thickness and straightness checks.
Welding & NDT: WPS/PQR-controlled welding; MT/UT/RT on critical welds if specified.
Mechanical testing: Tensile, yield and impact tests where required by standard or project spec.
Coating inspection: Film thickness, adhesion and holiday testing for protective systems.
Packaging, Transport & Site Support
Packaging: Bundled on skids with timber/polymer spacers; corner protection and shrink-wrap for coated sections.
Transport: Single-piece shipments sized to local transport/crane limits; long spans supplied as spliced segments with match-drilled splice plates.
Site support: Erection drawings, lifting point markings, splice kits and optional on-site supervision or alignment services.
Lead time: Typical 4–10 weeks depending on whether hot-rolled stock is available or fabrication is required.
Ordering Information - What We Need
Please provide:
Span and design loads (dead, live, crane, point loads).
Desired section depth or target bending moment/section modulus.
Material grade and finish preference (e.g., S355 + primer, galvanized).
Connection requirements (pre-drilled holes, copes, splice type).
Maximum transport/cranage capabilities at site.
Quantity and delivery schedule.
With these inputs we'll propose standard or built-up channel options, provide section properties (area, Ix, Sx, weight/m), fabrication drawings and a competitive quotation.
Why Choose Large-Section Medium Channel Steel?
Large-section medium channels provide a practical, economical middle ground-offering significant structural capacity and easy connectivity while avoiding the heavier cost and fabrication complexity of full plate girders. They're ideal when you need higher strength and stiffness but want straightforward bolted or welded connections and faster erection.
Hot Tags: large section steel medium channel steel, China large section steel medium channel steel manufacturers, suppliers, factory, drilling of i beam



