Medium Steel Flat Bar

Medium Steel Flat Bar

Medium Steel Flat Bar is a rectangular-section long steel product whose size sits between light flats and heavy plate. It provides a good compromise between strength, stiffness and cost, and is widely used for structural supports, machine bases, connection plates, stiffening strips, vehicle and agricultural fittings, conveyor guides, bearing plates and general machined parts. It can be delivered as raw stock or as pre-processed items (drilled, slotted, planed, galvanized, etc.) and is suitable as workshop stock or for project cut lists.
Send Inquiry
Description
Technical Parameters

Product Name

Medium Steel Flat Bar (Medium-Section Flat Bar / Medium Flat Stock)


1. Overview

Medium Steel Flat Bar is a rectangular-section long steel product whose size sits between light flats and heavy plate. It provides a good compromise between strength, stiffness and cost, and is widely used for structural supports, machine bases, connection plates, stiffening strips, vehicle and agricultural fittings, conveyor guides, bearing plates and general machined parts. It can be delivered as raw stock or as pre-processed items (drilled, slotted, planed, galvanized, etc.) and is suitable as workshop stock or for project cut lists.


2. Common Material Grades (examples)

Carbon structural steels: S235 / Q235 / A36 (general-purpose, good weldability).

High-strength low-alloy (HSLA): S355 / A572 Gr.50 (use when higher yield strength or thinner sections are desired).

Medium carbon / alloy steels (heat-treatable): 1045 / 4140 (42CrMo) (for parts requiring quench & temper).

Stainless steels: 304 / 316 (for corrosion resistance).

Special-purpose: wear-resistant, low-temperature or other alloy grades available to order.

Note: material choice affects yield, tensile strength, weldability, heat treatment and fatigue behavior. When ordering, please describe the working conditions (load type, impact/fatigue, corrosive environment, etc.) so we can recommend an appropriate grade and heat treatment.


3. Typical Size Range & Supply Conditions

Width (b): 20 mm – 300 mm (commonly stocked: 25 / 50 / 75 / 100 / 150 mm).

Thickness (t): 3 mm – 40 mm (commonly stocked: 4 / 6 / 8 / 10 / 12 / 16 / 20 mm).

Length: standard 3 m / 6 m / 12 m, or cut-to-length per drawings.

Supply states: hot-rolled, cold-rolled / cold-drawn, pickled & oiled, planed/ground, pre-galvanized or hot-dip galvanized (HDG).


4. Basic Physical & Mechanical Parameters (reference)

Density: ρ ≈ 7,850 kg/m³.

Elastic modulus: E ≈ 210,000 MPa.

Example yield strengths: S235 ≈ 235 MPa; S355 ≈ 355 MPa (refer to MTC for exact values).

Tensile strength & elongation vary by grade and heat treatment-specify if MTC and mechanical test reports are required.


5. Section Calculations & Useful Formulas (quick estimates)

Section area AAA (mm²) = b×tb \times tb×t.

Mass per metre (kg/m) = A×0.00785=b(mm)×t(mm)×0.00785A \times 0.00785 = b(\text{mm}) \times t(\text{mm}) \times 0.00785A×0.00785=b(mm)×t(mm)×0.00785.

Second moment of area III (about neutral axis; bending perpendicular to thickness):

I=b t312(mm4)I = \dfrac{b\,t^{3}}{12}\quad (\text{mm}^4)I=12bt3​(mm4)

Section modulus SSS (if extreme fiber distance is t/2t/2t/2):

S=It/2=b t26(mm3)S = \dfrac{I}{t/2} = \dfrac{b\,t^{2}}{6}\quad (\text{mm}^3)S=t/2I​=6bt2​(mm3)

Maximum deflection of a simply supported beam under uniform load (reference):

δmax=5wL4384EI\delta_{max}=\dfrac{5 w L^{4}}{384 E I}δmax​=384EI5wL4​

where www (N/mm) is the uniform load per unit length, LLL (mm) is the span, and EEE and III are as above.


6. Worked Examples (step-by-step, accurate)

50 × 6 mm

Area A=50×6=300 mm2A = 50 \times 6 = 300\ \text{mm}^2A=50×6=300 mm2.

Mass = 300×0.00785=2.355 kg/m300 \times 0.00785 = 2.355\ \text{kg/m}300×0.00785=2.355 kg/m.

Section modulus S=50×626=50×366=50×6=300 mm3S = \dfrac{50 \times 6^2}{6} = \dfrac{50 \times 36}{6} = 50 \times 6 = 300\ \text{mm}^3S=650×62​=650×36​=50×6=300 mm3.

100 × 10 mm

Area A=100×10=1000 mm2A = 100 \times 10 = 1000\ \text{mm}^2A=100×10=1000 mm2.

Mass = 1000×0.00785=7.85 kg/m1000 \times 0.00785 = 7.85\ \text{kg/m}1000×0.00785=7.85 kg/m.

Section modulus S=100×1026=100×1006=100006≈1666.67 mm3S = \dfrac{100 \times 10^2}{6} = \dfrac{100 \times 100}{6} = \dfrac{10000}{6} \approx 1666.67\ \text{mm}^3S=6100×102​=6100×100​=610000​≈1666.67 mm3.

150 × 12 mm

Area A=150×12=1800 mm2A = 150 \times 12 = 1800\ \text{mm}^2A=150×12=1800 mm2.

Mass = 1800×0.00785=14.13 kg/m1800 \times 0.00785 = 14.13\ \text{kg/m}1800×0.00785=14.13 kg/m.

Section modulus S=150×1226=150×1446=150×24=3600 mm3S = \dfrac{150 \times 12^2}{6} = \dfrac{150 \times 144}{6} = 150 \times 24 = 3600\ \text{mm}^3S=6150×122​=6150×144​=150×24=3600 mm3.

200 × 20 mm

Area A=200×20=4000 mm2A = 200 \times 20 = 4000\ \text{mm}^2A=200×20=4000 mm2.

Mass = 4000×0.00785=31.40 kg/m4000 \times 0.00785 = 31.40\ \text{kg/m}4000×0.00785=31.40 kg/m.

Section modulus S=200×2026=200×4006=800006≈13333.33 mm3S = \dfrac{200 \times 20^2}{6} = \dfrac{200 \times 400}{6} = \dfrac{80000}{6} \approx 13333.33\ \text{mm}^3S=6200×202​=6200×400​=680000​≈13333.33 mm3.

These values are suitable for preliminary bending capacity and mass estimates. Final design must also check deflection, shear, local buckling and connection strengths.


7. Surface Treatments & Corrosion Protection Strategies

As-rolled (mill finish): economical; suitable for welding and shop processing.

Pickled & oiled: short-term rust protection; good for storage/export.

Hot-dip galvanizing (HDG): preferred for long-term outdoor corrosion protection (coating mass per EN/ASTM).

Electroplating / zinc spray / thermal spraying: for local or lighter protection.

Phosphating + primer/topcoat / powder coating: for combined appearance and corrosion resistance.

Planing / grinding: for bearing plates, supports or where high flatness is required.

Duplex systems (galvanize + paint): best durability in aggressive environments.


8. Machining & Value-Added Services (factory-capable)

Cutting (saw, plasma, laser).

CNC punching / drilling / slotting / milling (holes and patterns can be kitted).

Bending, cold forming or small-batch forming.

Welded assemblies (flanges, stiffeners, splice plates, pre-assembled brackets).

Precision planing, surface grinding or face milling (for bearing plates).

Heat treatment for alloy grades (normalizing, annealing, quench & temper, carburizing, nitriding).

Surface finishing: galvanizing, painting, phosphating, powder coating.

Part numbering, kitting and bolt-pack assembly for on-site installation.


9. Quality Control & Inspection

Material certificates (MTC): chemical composition, mechanical properties and heat number traceability.

Dimensional inspection: width, thickness, length, flatness and surface condition.

Mechanical testing: tensile, yield; Charpy impact test if required.

Weld inspection: visual, MT, PT or UT as per contract.

Coating inspection: galvanize mass (g/m²), paint film thickness and adhesion.

Factory inspection report and batch marking for traceability.


10. Selection Advice & Engineering Considerations

Clarify working conditions: load type (uniform/concentrated/impact), maximum bending moment, support conditions and allowable deflection (e.g., L/250, L/360).

Choose material grade: to reduce weight for same capacity consider S355 vs S235-verify weldability and notch toughness.

Cross-section choice: width helps distribute bearing and surface load; thickness dominates bending stiffness (I∝t3I \propto t^3I∝t3).

Local reinforcement: add bearing plates or stiffeners at holes and concentrated loads to prevent local buckling or fatigue.

Corrosion strategy: for outdoor conditions HDG or duplex coating is recommended; for coastal/chemical environments increase protective coating levels.

Transport & erection constraints: if single-piece lengths exceed routing or crane limits, plan spliced delivery and supply splice plates with alignment holes.


11. Packaging & Logistics

Stack flat on timber pallets or steel racks, use polypropylene or wooden spacers, and band with steel straps.

Precision or coated items wrapped in plastic / VCI film; apply protective oil for long-term shipments.

Label each bundle with size, length, quantity, heat number and PO number for easy inspection and inventory.

For very long pieces provide edge protection, bracing and handling instructions; door-to-door transport and lifting assistance can be arranged.


12. Lead Times (typical guidance)

Stock sizes (standard carbon grades): 1–2 weeks depending on inventory and quantity.

Pre-processed orders (drilling, galvanizing, planing): 2–6 weeks depending on batch size and processes.

Special grades, heat treatment or third-party inspection: 4–12 weeks depending on scope-contract will confirm delivery.


13. Ordering Checklist - Please Provide

Size list (width × thickness × length × quantity) or a full cut list.

Material grade and whether MTC / impact tests are required.

Surface treatment (mill / pickled & oiled / HDG / painted / planed, etc.).

Processing requirements (holes / slots / welding / planing / labeling).

Inspection requirements (third-party witness, NDT, hardness/chemical reports).

Delivery schedule, batching preferences and transport constraints (door-to-door required?).


14. FAQ (Common Questions)

Q: How to quickly calculate flat bar mass?
A: mass (kg/m) = b(mm) × t(mm) × 0.00785.

Q: Which dimension to use for bending modulus?
A: For bending perpendicular to the thickness, use S=bt26S = \dfrac{b t^2}{6}S=6bt2​.

Q: What corrosion protection is recommended for outdoor use?
A: Hot-dip galvanizing (HDG) or duplex (galvanize + coating) is recommended for durability.

Q: Can you pre-drill and kit parts for site delivery?
A: Yes - we support CNC drilling/punching and can pack by kit number for fast on-site assembly.


If you like, I can do one of the following (please choose and provide the necessary input):
A. Using a specific working case (span, uniform/concentrated loads, allowable deflection), calculate and recommend 2–3 candidate sizes (including strength and deflection checks);
B. Convert your frequently used size list (10–15 items) into a ready-to-order size–weight–length list with recommended material and typical lead times;
C. Produce a quotation checklist template you can use to request quotes from suppliers, including technical and acceptance clauses.

Tell me A, B or C and supply the sizes or working parameters, and I'll generate the detailed result immediately.

Hot Tags: medium steel flat bar, China medium steel flat bar manufacturers, suppliers, factory