Classification of tinplate

Aug 29, 2023 Leave a message

1. Equal thickness tin plate: Cold rolled electroplated tin plate with the same amount of tin on both sides.
2. Differential thickness tinplate: Cold rolled electroplated tinplate with different amounts of tin on both sides.
3. First level tinplate: Electroplated tinplate that has undergone online inspection is suitable for conventional painting and printing on the entire surface of the steel plate under normal storage conditions, and must not have the following defects: ① pinholes that penetrate the thickness of the steel plate; ② Deviation of thickness exceeding the standard; ③ Surface defects such as scars, dents, wrinkles, and rust that have an impact on the intended use; ④ Shape defects that have an impact on usage.
4. Second level tinplate: The surface quality is lower than that of the first level tinplate, and small and obvious surface defects or shape defects such as inclusions, wrinkles, scratches, oil stains, indentations, burrs, burning points, etc. are allowed. It is not guaranteed that the entire steel plate can undergo conventional painting and printing.