Product Name
Medium I-Beam (Large-Section Category)
Introduction
The Medium I-Beam (Large-Section Category) fills the gap between standard rolled beams and the very heavy plate girders used in mega-projects. It's a factory-manufactured I/H profile with substantial depth and flange area, optimized for medium-to-long spans and heavy floor or crane loads where standard universal sections are insufficient but full plate girders would be uneconomic. Commonly used in industrial buildings, medium-span bridges, crane runways and structural transfer beams.
Typical Specifications
| Parameter | Typical Range / Notes |
|---|---|
| Section depth (h) | 300 – 900 mm (common "medium" range within large-section families) |
| Flange width (b) | 150 – 400 mm |
| Web thickness (tw) | 8 – 25 mm |
| Flange thickness (tf) | 12 – 60 mm |
| Mass per metre | ~50 – 250 kg/m (depends on exact section) |
| Standard lengths | 6 m, 9 m, 12 m; spliced for longer spans |
| Materials / Grades | S355 / S420 (EN); A572 Gr.50, A992 (ASTM); weathering steel or higher-strength grades on request |
| Yield strength | ≈ 355 – 420 MPa (grade dependent) |
| Tensile strength | ≈ 470 – 600 MPa (grade dependent) |
| Typical fabrication | Hot-rolled (where available), or welded/built-up from plates for non-standard sizes |
| Surface finish | Mill, shot-blast + primer, hot-dip galvanize, epoxy/PU coating, or intumescent fireproofing |
Key Features & Advantages
Optimized strength-to-weight: Deeper web and wider flange deliver high section modulus without the cost/complexity of large plate girders.
Versatile sizing: Available as standardized medium-heavy rolled sections or as economical plate-welded built-up beams to meet exact capacity/transport constraints.
Ease of connection: Flat flanges and webs simplify bolting, welding and connection detailing for typical steelwork connections.
Good shear & lateral stability: Option to add web stiffeners, flange stiffeners or cover plates for concentrated loads and shear-critical spans.
Cost-effective on-site erection: Lower fabrication time than full plate girders and easier lifting/handling than oversized sections.
Coating & fire protection: Supplied with surface systems for corrosive or fire-rated environments.
Typical Applications
Industrial building primary beams and crane runways (medium-duty cranes).
Medium-span bridges and culverts where rolled depth is advantageous.
Transfer girders and mezzanine supports in warehouses and manufacturing plants.
Structural members in multi-storey car parks, workshops and heavy equipment platforms.
Retrofit strengthening, where a larger-section upgrade is needed without full plate-girder complexity.
Fabrication & Value-Added Options
Built-up options: Welded flange-and-web plate girders to achieve non-standard depths or widths.
Pre-drilling & coping: CNC hole patterns, shear-bolt holes and shop coping for rapid bolted erection.
Web openings & stiffeners: Factory cutouts for services, with reinforcement plates and stiffeners fitted.
Cambering: Factory camber to compensate service loads and control deflection.
Finish: Shot blasting, priming, hot-dip galvanizing, multi-coat epoxy/PU or intumescent coatings.
Pre-assembly: Pre-tacked splices, match-drilling and shipping in erection packs.
Quality Assurance & Testing
Mill Test Certificates (MTC) with chemical & mechanical data.
Dimensional inspection: depth, flange width, web/flange thickness and straightness.
Weld quality: WPS/PQR-controlled welding with MT/UT/RT on critical seams as specified.
Mechanical testing: Tensile, hardness and, if required, impact tests for low-temperature service.
Coating inspection: film thickness and adhesion testing per specification.
Packaging, Transport & Delivery
Bundling: Sections banded and separated by polymer/timber spacers to avoid damage.
End protection: Corner guards and edge protection for coated/galvanized finishes.
Transporting: Single-piece lengths up to transport/crane limits; longer spans shipped as spliced segments with match-drilled splice plates.
Lead time: Typical 4–8 weeks for stock/standard sizes; 6–12+ weeks for built-up or heavily finished beams (depends on quantity and scope).
Ordering Information - What We Need
Please provide:
Required span(s) and loads (dead, live, crane, point loads).
Desired section depth or capacity goal (or existing section to match).
Material grade and finish preference (e.g., S355 + primer, hot-dip galvanize).
Connection details and any pre-drilling or coping requirements.
Maximum transport/cranage limits at site (for single-piece sizing).
Quantity and delivery schedule.
With those inputs we can propose rolled or built-up medium I-beam options, produce section properties (Ix, Sx, area, weight/m), detailed drawings, and a competitive quotation.
Why Choose This Medium I-Beam?
It strikes the practical balance between performance and cost for many heavy-duty building and industrial applications - stronger and stiffer than standard universal beams, yet simpler and more economical to produce and erect than very large plate girders. If you give me span and load info I'll size a few recommended beam options (rolled vs built-up) and provide weights, section moduli and a price estimate.
Hot Tags: medium i-beam in large section steel, China medium i-beam in large section steel manufacturers, suppliers, factory, long plug connectors, durable h beam, engineered h beam, long surface treatment products, long screw products, long bar products



