Barsteel

Barsteel

Steel Bars are foundational metal products supplied in solid cross-sections—round, square, flat, hexagonal—and as deformed reinforcing bars. They serve as raw material for machining, forging, fabrication and construction. Available in mild/carbon, alloy and stainless grades, steel bars offer predictable mechanical properties, a broad size range, and multiple finishes to suit mechanical parts, structural members and reinforcement uses.
Send Inquiry
Description
Technical Parameters

Product Name

Steel Bar (Round, Square, Flat, Hex & Rebar)


Introduction

Steel Bars are foundational metal products supplied in solid cross-sections-round, square, flat, hexagonal-and as deformed reinforcing bars. They serve as raw material for machining, forging, fabrication and construction. Available in mild/carbon, alloy and stainless grades, steel bars offer predictable mechanical properties, a broad size range, and multiple finishes to suit mechanical parts, structural members and reinforcement uses.


Typical Product Range & Specifications

Forms:

Round bar / shaft stock (solid)

Square bar

Flat bar / strip (solid)

Hexagonal bar

Deformed bar (rebar) for concrete reinforcement

Materials / Grades (examples):

Carbon/mild: A36, S235, S275

Medium carbon / heat-treatable: C45 / 1045, 4140 (alloy)

High-strength / low-alloy: A572 Gr.50, S355

Stainless: 304 / 304L, 316 / 316L

Rebar: HRB335 / HRB400 / HRB500 (or regional equivalents)

Size ranges:

Round: Ø4 mm – Ø200 mm (typical)

Square: 5 × 5 mm – 200 × 200 mm

Flat: width 10 – 400 mm, thickness 2 – 40 mm

Hex: across-flats 6 – 150 mm

Rebar: 6 mm – 40 mm

Lengths: standard mill lengths 1–6 m, 6 m, 12 m; custom cut-to-length available.

Surface / finish: mill, pickled & oiled, cold-drawn, ground/bright, galvanized, coated or polished.


Mechanical Properties (typical, depend on grade & heat treatment)

Yield strength: ~235 MPa (mild) up to >700 MPa (quenched & tempered alloys)

Tensile strength: ~360 – 900 MPa depending on material and treatment

Elongation: typically 10–25% (grade dependent)


Key Features & Advantages

Wide material choice: from inexpensive mild steel to corrosion-resistant stainless and high-strength alloys.

Versatile forms: used across structural, machining and finishing workflows.

Value-added processing: available cold-drawn, ground to tight tolerances, heat treated, or pre-machined.

Good fabrication properties: most grades weld, cut, form and machine well with appropriate procedures.

Traceability & certification: MTCs and test reports available per order.


Typical Applications

Shafts, pins, fastener blanks, and machined components.

Structural braces, frames, gussets and fabricated assemblies.

Rebar for reinforced concrete (buildings, bridges, civil works).

Tooling blanks, forging stock and automotive parts.

Architectural and decorative metalwork.


Quality Assurance & Testing

Documentation: Mill Test Certificates (MTC) with chemical and mechanical data.

Testing: Tensile, hardness, and bend tests as required; NDT (UT/MT/PT) for critical parts.

Dimensional control: Straightness, section tolerance and surface finish inspections.

Traceability: Heat/lot numbers and batch labeling on request.


Packaging & Delivery

Bundled with timber/polymer spacers and strapped; precision bars may be crated.

End protection (caps/film) and VCI wrapping for long-term storage or export.

Lead time: stock sizes 3–10 days; custom grades, heat treatment or machining 2–6 weeks (depending on scope).


How to Order / Technical Info Needed

Please provide: desired form (round/square/flat/hex/rebar), size (diameter/width × thickness), material grade, length, finish/heat-treatment requirements, quantity, and any testing/certification needs. If the bar is for a critical or load-bearing part, include operating loads and environment so we can recommend the optimal grade and treatment.


If you want, I can produce a size-to-weight table, section-property chart (area, mass/m, Ix), or recommend a specific grade and heat-treatment for a shaft, pin or reinforcement application-tell me the dimensions and use case and I'll prepare it.

Hot Tags: barsteel, China barsteel manufacturers, suppliers, factory