Product Name
Cold-Drawn Round Bar (Cold-Drawn Bright Round Bar)
Introduction
Cold-drawn round bars are precision solid round steel bars produced by cold drawing (pulling a descaled/hot-rolled bar through calibrated dies) to deliver tight dimensional tolerances, superior surface finish, excellent straightness and enhanced mechanical properties through strain hardening. They are used where accurate diameters, good surface quality and improved strength are required for shafts, pins, fasteners, precision machined parts and tooling components.
Typical Manufacture & Supply Conditions
Process: Pickling/descaling of a hot-rolled blank → cold drawing through progressive dies (single or multi-pass) → straightening → cut to length → optional stress-relief/anneal → optional grinding.
Supply conditions: As-drawn (bright, work-hardened), annealed/stress-relieved (for improved machinability), precision ground or polished (for bearing/finish fits).
Sizes & Tolerances (typical)
Diameter range (common): Ø3 mm – Ø150 mm (standard commercial range; up to Ø200 mm by special arrangement).
Lengths: cut-to-length (1–6 m typical), bar bundles; custom lengths on request.
Dimensional tolerances (typical):
As-drawn standard: ±0.02 mm to ±0.10 mm (tightness depends on diameter and drawing class).
Precision ground: ±0.005 mm to ±0.03 mm possible.
Straightness: typically ≤ 0.2 – 1.0 mm/m depending on diameter and grade.
Materials & Common Grades
Carbon / mild steels: SAE/AISI 1018, 1020, 1045; EN C15/C22/C45 equivalents.
Alloy steels: 4140 / 42CrMo, 4340, 8620 (for case hardening).
Stainless: 304 / 304L, 316 / 316L (cold-drawn stainless bright bar).
Free-machining / special: leaded free-cutting grades (e.g., CW614N equivalent) and custom alloys on request.
Mechanical Properties (guidance)
Cold drawing increases yield & tensile strength and reduces elongation compared with the same grade in hot-rolled condition. Exact properties depend on grade and drawing reduction. Example ballpark for medium carbon steels (as-drawn):
Yield: ~250 – 550 MPa
Tensile: ~400 – 800 MPa
Elongation: ~8 – 20%
For tight specification orders provide grade and desired supply condition for precise mechanical data.
Surface & Finishes
As-drawn bright (typical surface with faint draw marks).
Oiled / VCI wrapped for corrosion protection.
Precision ground / centerless ground for bearing fits and sealing surfaces.
Polished / mirror finish for decorative or special sealing applications.
Passivation available for stainless bars.
Key Features & Advantages
Tight diametral tolerances - reduces machining allowance and scrap.
Superior surface finish - less scale/defects than hot-rolled stock.
Improved straightness & concentricity - easier fixturing and assembly.
Enhanced mechanical properties from cold work (better yield & tensile).
Better fatigue resistance in many applications due to work-hardened near-surface condition.
Flexible supply conditions - can be annealed for machining or supplied hardened/ground.
Typical Applications
Precision shafts, pins, studs and dowels.
Fasteners, bolts and nut blanks.
Machined components, gear blanks and spindles.
Bearing journals (when ground), hydraulic pistons and valve stems.
Tooling components, jigs and fixtures.
Automotive, instrumentation and general engineering parts.
Quality Assurance & Testing
Mill Test Certificate (MTC) with chemical and mechanical results on request.
Dimensional inspection: diameter, straightness and length checks per batch.
Mechanical tests: tensile, hardness and impact tests available per spec.
Surface inspection: visual/roughness checks; eddy current or UT on request for critical parts.
Traceability: heat/lot marking available upon request.
Weight Formula (quick reference)
Mass (kg/m) ≈ 0.006165 × (diameter in mm)²
Ø10 mm → 0.62 kg/m
Ø25 mm → 3.85 kg/m
Ø50 mm → 15.41 kg/m
Packaging & Delivery
Bundled with timber/polymer spacers, plastic end caps for ground bars.
Oiled or VCI-wrapped for export/long storage.
Precision ground/finished bars crated individually or packed per customer requirement.
Typical lead times: stock sizes 3–14 days; custom grades/ground or heat-treated orders 2–8 weeks (depends on quantity).
Ordering Information - What We Need
When requesting a quote, please specify:
Diameter(s) × length(s) × quantity.
Material grade and required supply condition (as-drawn / annealed / stress-relieved / ground).
Dimensional tolerance class and straightness requirement.
Surface finish/coating (oiled, VCI, ground, polished).
Required mechanical properties / heat treatment (if any).
Any NDT or certification needs (MTC, tensile, hardness, PMI).
Delivery/packaging instructions and target lead time.
If you like, send a size/quantity list and the intended application (e.g., shafts vs bearing journals) - I'll return a size-to-weight table, recommended grade and an indication of machining allowance for your chosen finish.
Hot Tags: cold-drawn round bar, China cold-drawn round bar manufacturers, suppliers, factory




