Product Name
Cold-Drawn Square Steel (Cold-Drawn Bright Square Bar)
Introduction
Cold-drawn square steel are precision solid square bars produced by cold drawing (or cold rolling + drawing) from descaled/hot-rolled billets through shaped dies to produce accurate across-flats dimensions, excellent straightness, superior surface finish and improved mechanical properties from work hardening. They are used where tight tolerances, good surface quality and predictable mechanical behaviour are required - e.g., precision machined parts, keys, shafts with flats, tooling, jigs and decorative architectural elements.
Manufacture & Supply Conditions
Process: Pickling/descaling → cold drawing through matched square dies → straightening → cutting to length → optional stress-relief/anneal → optional precision grinding.
Supply conditions: As-drawn (bright, work-hardened), annealed/stress-relieved (improved machinability), or precision ground/turned (tight tolerances, bearing fits).
Typical Sizes & Tolerances
Across-flats (side): commonly 6 mm – 200 mm (custom sizes available).
Lengths: standard 1–6 m, 6 m, cut-to-length per order.
Dimensional tolerances (typical):
Standard cold-drawn: ±0.02 mm → ±0.3 mm (depends on side size and drawing class).
Precision ground/finished: ±0.005 mm → ±0.05 mm possible.
Straightness: typically ≤ 0.2 – 1.0 mm/m (tighter control for precision production runs).
Materials & Common Grades
Carbon / medium carbon: SAE/AISI 1018, 1045; EN C15 / C45 equivalents.
Alloy steels: 4140 / 42CrMo, 4340 (where heat-treatment is required).
Stainless: 304 / 304L, 316 / 316L (cold-drawn stainless square bars available).
Specials: Free-machining grades and custom alloys on request.
Mechanical Properties (guidance)
Cold drawing raises yield & tensile strengths and reduces elongation relative to the same grade in hot-rolled condition. Typical ranges (depend on grade & reduction):
Yield strength: ~250 – 600 MPa
Tensile strength: ~400 – 800 MPa
Elongation: 8 – 20%
(Provide exact grade and required supply condition to obtain precise property tables.)
Surface & Finishes
As-drawn bright finish with fine draw marks.
Oiled / VCI-wrapped for export or long-term storage.
Precision ground for bearing journals or sealing faces.
Polished / decorative finishes for architectural use.
Passivation for stainless types.
Features & Advantages
Tight dimensional control: reduces machining allowance and scrap.
Superior surface finish & straightness: improves assembly fit and aesthetic quality.
Enhanced mechanical performance: improved yield/tensile from cold work; good fatigue behavior in many applications.
Wide supply options: can be supplied soft (annealed) for machining or in as-drawn hard condition for higher strength.
Cost/time savings: less downstream machining required vs hot-rolled stock.
Typical Applications
Keys, wrench flats, coupling hubs and machined parts.
Shafts with flats, studs, pins and dowels.
Precision fixtures, jigs, tooling supports and gauge blocks.
Architectural trim and decorative metalwork requiring accurate flats.
Automotive subcomponents and industrial machinery parts.
Dimensional / Weight Reference
Mass per metre (kg/m) formula:
mass (kg/m)=(side in mm)2×0.00785\text{mass (kg/m)} = (\text{side in mm})^{2} \times 0.00785mass (kg/m)=(side in mm)2×0.00785
Examples:
20 × 20 mm → 3.14 kg/m
50 × 50 mm → 19.63 kg/m
100 × 100 mm → 78.50 kg/m
Quality Assurance & Testing
Traceability: Mill Test Certificate (MTC) available on request.
Dimensional inspection: across-flats, straightness and tolerance reports per batch.
Mechanical testing: tensile, yield and hardness tests available per order.
Surface inspection: visual and roughness checks; UT/eddy-current NDT available for critical orders.
Batch marking & traceability to heat/lot number when required.
Packaging & Delivery
Bundles strapped on wooden skids with polymer spacers to prevent marking.
Ends protected with plastic caps for ground bars; VCI/oil protection for long-term storage.
Individual crating for precision-ground or polished pieces.
Typical lead time: stock sizes 3–14 days; custom grades, precision grinding or heat-treated orders 2–8 weeks depending on quantity.
Ordering Information - What We Need
Please provide:
Across-flats size × length × quantity.
Material grade and desired supply condition (as-drawn / annealed / stress-relieved / ground).
Tolerance class and straightness requirement.
Surface finish / coating (oiled, VCI, ground, polished).
Any required mechanical properties, heat treatment, or NDT/certification (MTC, tensile, hardness, PMI).
Intended application (machining/structural/architectural) to recommend optimal drawing reduction and finishing.
If you like, send a size list and target tolerances - I'll return a size-to-weight table, recommended grades and a sample quotation.
Hot Tags: cold drawn square steel, China cold drawn square steel manufacturers, suppliers, factory




