The hot dip galvanizing of steel pipes is achieved by immersing the steel pipes in zinc solution to coat the surface with a zinc coating. In order to effectively achieve the hot-dip galvanizing process, it is necessary to ensure that the surface of the steel pipe is clean before it comes into contact with the zinc solution. In order to obtain a uniform galvanized layer with good corrosion resistance and adhesion strength, steel pipes need to undergo a series of surface treatments after galvanizing. The production process of hot-dip galvanizing of steel pipes must meet the above requirements.
The production process of hot-dip galvanized steel pipes varies depending on the hot-dip galvanizing method used. The methods used in the past include the auxiliary plating agent method and the micro oxidation-reduction method, among which the auxiliary plating agent method for hot dip galvanizing includes the lead zinc method, wet galvanizing, and dry galvanizing.
The process can be divided into the following stages.
1. Surface pretreatment process section. It includes hot water cleaning, degreasing treatment, water cleaning, acid pickling treatment, water storage, plating agent treatment, and drying processes for steel pipes. Hot water cleaning is used to remove metal chips, dust, rust, and cutting iron chips from the surface of steel pipes. When processing, the steel pipe is first immersed in a hot water bath for cleaning, and at the same time, the steel pipe is preheated to enhance the effectiveness of the next degreasing and pickling process.
The cleaned steel pipe is cleaned in a chemical degreasing tank to remove any grease on the surface. The degreased steel pipe undergoes another hot water cleaning to remove residual alkaline degreasing solution and degreased sediment from the steel pipe. To remove rust and oxide scale from the surface of the steel pipe, the steel pipe is pickled in an acid pickling tank, usually in an acid pickling solution with a corrosion inhibitor added.
The steel pipe after acid pickling and rust removal needs to be cleaned with water to remove residual solution and sediment from the acid pickling. The pickled steel pipe is then immersed in a weakly acidic cold water tank for storage, ready for the next step of treatment with the plating aid process. The main function of dip coating aids is to remove oxides and iron salts from the surface of the steel pipe, thereby ensuring that the surface of the steel pipe remains clean and not oxidized again before galvanizing.
2. Galvanizing process section. The galvanizing process section includes the hot dip galvanizing treatment of steel pipes. The steel pipes coated with plating aids are dried in a drying furnace and preheated to around 200 degrees Celsius. Preheating steel pipes can reduce the consumption of heat in the zinc pot, reduce the intensity of heating the zinc pot, and thus extend the service life of the zinc pot and improve labor conditions. After being baked, the steel pipe is sent to the zinc pot by the galvanizing machine for galvanizing, and then removed from the zinc pot. The surface of the steel pipe is immersed in a liquid zinc layer. Immediately after galvanizing, the steel pipe is sprayed with steam and compressed air to remove excess zinc from the surface and ensure a uniform and smooth coating surface.
3. Post plating treatment process section. The post plating treatment process section includes the process of dipping steel pipes into zinc and leaving the zinc pot until they are cooled to room temperature. This includes processes such as air cooling, water cooling, drying, and passivation treatment after external and internal spraying of steel pipes. Cooling after spraying treatment can quickly cool the steel pipe and terminate the growth of the iron zinc alloy layer. Galvanized steel pipes can undergo passivation treatment as needed.
4. Post processing process section. The post processing process of steel pipes refers to the processes of inspection, threading, straightening, printing, weighing, bundling and packaging after hot-dip galvanizing of steel pipes.
Industrial Process Of Hot-dip Galvanizing Of Steel Coils
Aug 21, 2023
Leave a message
No Information
Next




